ADJUSTABLE BACKLIGHT COLORS - GROUP TONES SUPPORTED
You can set the LCD Panel to 8 different colors.
The Display Size is 5.2"x1.6" (130x40 mm). It uses a large dot matrix (264x64 dots) LCD display which ensures excellent visibility - night or day.
The VR-6600PRO supports the most common Analog Tones. It supports CTCSS, DCS, and DTMF calling methods. Set-up your calling methods to call by group tones. Tone calling (private line) is required by most repeater applications and the VR-6600PRO supports the latest standards
SEPARATE FRONT LCD PANEL AND DTMF MICROPHONE
The VR-6600PRO has a front panel that is separated from the main radio body. The panel is connected with standard Ethernet cable (15' included) allowing the radio body to be remotely (or trunk) mounted. The Front Panel includes several mounting accessories including a suction cup mount.
The Front Panel has a built-in microphone which allows you to either use either the included DTMF Microphone or Panel Microphone. The Separate DTMF microphone can also be plugged directly into the Main Radio Body.
REAR OF THE REMOTE HEAD - MULTIPLE AUDIO OPTIONS
The VR-6600PRO includes separate volume adjustments for the independent VFOs. The VR-6600PRO has dual speakers in the LCD panel - allowing stereo audio when one station is being received, but separate monaural speakers when both VFOs are active - which are controlled by the separate volume knobs. A third speaker is located on the radio body - which can be set as the only speaker, simultaneously be used with the panel speakers, or can be unused as well.
The VR-6600PRO has both line-in and line-out jacks that allow you to output the radio audio to your own speaker system. The VR-6600PRO allows you to listen to a line-in source while still monitoring your local nets.
The Front Panel includes several mounting accessories including a suction cup mount. (Uses a Ram Ball Mount)
1000 MEMORY CHANNELS - HIGH POWER OUTPUT
The VR-6600PRO has 1000 memory channels and 2 separate memory banks (The Right VFO has 500 channels, the left VFO has 500 channels). You can program both active (TX/RX Channels) and passive (RX Only) channels into the same Memory bank
The UV-50X3 will transmit at 50 watts on both UHF and VHF; and it will transmit at 5 watts on 222-225MHz.
The VR-6600PRO was includes a wide receiver that can receive beyond the transmitting frequencies on VHF/1.25M/UHF.
The VR-6600PRO can also receive:
.5-1.71MHz (AM Radio)
76-108MHz (FM Radio)
108-135.995MHz (Air Band (AM))
THOROUGH QUALITY CONTROL
Each VR-6600PRO is individually tested during extreme temperatures (-22 F) to ensure every radio can meet advertised performance requirements.
The VR-6600PRO can endure harsh environments and still perform in the most extreme situations.
The VR-6600PRO is more than just a radio - it can also act as a full cross-band repeater! Allowing you to connect or extend the range of your repeaters, handhelds, and mobiles. The Cross-Band repeater works in between VHF and UHF frequencies.